Installation Instructions

Installation Instructions

  • Remove magazine and check to make sure firearm is clear and safe
  • Pull slide rearward approximately 0.25″ and hold
  • Release slide forward and release slide lock
  • Pull slide forward off of the gun
  • Remove recoil spring
  • Remove barrel
  • Replace with META Tactical 16″ barrel
  • Re-install slide onto the gun by sliding it from the front of the gun to the rear
  • Make sure the frame rails are engaged with the slide rails
  • Press button and open rear door
  • Insert the gun into the chassis
  • Close the rear door until button clicks
  • Push firing pin into chassis
  • Screw on the compensator clockwise onto barrel
  • Pull the slide back using the charging handle
WATCH VIDEO: