What barrel length do I need to run a suppressor on my MX-1 or APEX kit?

• Related Articles

• Can I run a suppressor or silencer with the chassis system?

  Yes, but not with a standard setup. Standard chassis frames do not have enough internal clearance to safely house a suppressor. To run a suppressor safely, you must use an extended barrel so the suppressor sits entirely outside the chassis housing.

• Is the kit compatible with different firearm generations (e.g., Gen 4 vs. Gen 5)?

  Yes, we offer models compatible with various generations. However, you must verify the exact generation when ordering, as frame dimensions differ between most firearm generations. Even if a frame is supposed to share layouts, the tolerancing of ...

• My suppressed chassis is having cycling issues. How do I fix this?

  Most modern semi-automatic pistols use a browning action, tilting-barrel (short-recoil) system. Adding an extended barrel and a heavy suppressor adds a lot of mass, which can disrupt the timing of the action and cause jamming. If you run into ...

• What thread sizes are your barrels, and which suppressors are compatible?

  All META Tactical barrels have the following thread sizes: 9mm caliber barrels: ½” x 28 thread 10mm/.40 caliber barrels: 9/16” x 24 thread .45 caliber barrels: .578” x 28 thread Direct-Thread Suppressor Warning ⚠️ Important: Direct-thread suppressors ...

• Can I use aftermarket performance parts, like a Radian Afterburner + Ramjet compensator?

  The MX-1 and APEX setups will not allow for muzzle compensators due to the specific way we charge the weapon system. Join our email newsletter to be first in line for new accessory variations and product updates that may support aftermarket ...